DILOG 9083P 17th Edition & Part P Multi Function Tester with a free DL6790 Combivolt 2, DL1023 case and a Calibration Certificate worth over £200.00

The all new 9083P multi function tester has been designed to take into account the requirements of theforthcoming 17th Edition and Part P testing standards. It also incorporates many of the features that you haverequested.The unique RCD-LOC feature allows loop testing without tripping any type of RCD.The 9083P is fully compliant with the performance requirements of BS EN 61557.

Product Features:

• Loop impedance measurement without tripping out any RCD.
• Insulation measurement with 100, 250, 500 V test voltages.
• RCD testing, trip time, trip current, ramp current.
• RCD auto test without going between the unit and RCD. With a recall of the test results.
• Continuity test with auto null facility to zero out lead resistance.
• Protected against damage when accidentally connected across phases.
• Integrated polarity test.

Product Specifications:

• Display: 31/2 digit LCD 1999 digits.
• Insulation resistance: 0.05 – 2000 Mohm.
• Test voltage at 1mA 100, 250,500 V.
• Continuity: 0.05 – 199 ohms.
• Loop Impedance 0.01 – 2000 Ohms.
• PSCC 0 – 26 kA.
• RCD nominal test currents 10, 30, 100, 300, 500 mA, 1/2 x 30 mA, 5 x 30 mA.
• Trip time 0 ms – 500ms.
• Tripping current with ramp test 1/2 rated current to 1.1 rated current.
• Voltage: 0 – 440 V.
• Frequency: 45 – 65 Hz.

Safety standards EN61010, BS EN 61557 BS 7671

• Over voltage category CAT III 300 V.
• Power supply 6 x 1.5 V AA batteries.
• Dimensions: 260 x 105 x 55.